Instantaneous water heater MH 3..7
The small, vented instantaneous water heater MH is the right choice if you wish to replace conventional vented storage water heaters used in conjunction with open outlet taps. This economic appliance is quickly installed and eliminates costly standby heat losses at each basin or sink.
- Mini-sized, hydraulically controlled under-sink instantaneous water heater to supply a single point of use
- The heating element is activated automatically as soon as water begins to flow through the unit
- Bare wire technology IES® achieves maximum efficiency plus the fastest possible heat up time
- Non-pressure water heater for one outlet with open-outlet (vented) tap
- Supplied completely with special tap nozzle with integrated flow rate regulator for fitting in tap threads M22 / M24
- Variations for installation beneath the wash basin
(undersink unit, water connections are facing upwards):
MH 3: 3.5 kW 230 V (approx. 2.0 l / min ∆t 25 K)
MH 4: 4.4 kW 230 V (approx. 2.5 l / min ∆t 25 K)
MH 6: 5.7 kW 230 V (approx. 3.3 l / min ∆t 25 K)
MH 7: 6.5 kW 400 V (approx. 3.7 l / min ∆t 25 K) - Variations for installation above the wash basin
(oversink unit, water connections are facing downwards):
MH 3-O: 3.5 kW 230 V (approx. 2.0 l / min ∆t 25 K)
MH 4-O: 4.4 kW 230 V (approx. 2.5 l / min ∆t 25 K)
MH 6-O: 5.7 kW 230 V (approx. 3.3 l / min ∆t 25 K)
MH 7-O: 6.5 kW 400 V (approx. 3.7 l / min ∆t 25 K) - Dimensions (H × W × D): 13 × 18.5 × 8 cm
- Energy efficiency class A
The declaration complies with the requirements of the EU regulation No 812/2013 being binding as of September 2015.
